Programming buttons for the garage door opener - EQE SUV September 2024 X294 MBUX Owner's Manual
Requirements:
- The vehicle has been parked outside the garage or outside the range of movement of the door.
- The vehicle is switched on.
- The vehicle is not in
(Starting the vehicle with the start/stop button) .
- The vehicle is not in
The garage door opener function will always be available when the vehicle is switched on.
When you operate or program a garage door with an integrated garage door opener, persons can become trapped or struck by the garage door if they stand within its range of movement.
- Doors with a safety stop and reversing function
- Doors that conform to the current U.S. safety standards
Operate only the following doors using the garage door opener:
Before programming the garage door opener, park the vehicle outside the garage. Ensure that the vehicle is switched on but not started.
- NZLMUAHL5 (USA)
- 4112A-MUAHL5 (Canada)
Radio equipment approval number:



Indicator lampwill flash yellow.
It may take up to 20 seconds before the indicator lamp flashes yellow.
Indicator lampwill continue to flash yellow.






- Indicator lamp
lights up green continuously. Programming is complete.
- Indicator lamp
- Indicator lamp
flashes green. Programming was successful. Additionally, the rolling code must be synchronized with the door system.
- Indicator lamp

The remote control for the door drive is not included in the scope of delivery for the garage door opener.