Folding the rear seats forwards electrically - EQS SUV November 2022 X296 MBUX Owner's Manual
Requirements
- The area into which the seat is folded is clear.
- The seat has been folded up (Folding back the rear seat backrest) .
- The centre armrest is folded up.
When you adjust a seat, you may trap yourself or a vehicle occupant.
The seat backrest may fold forwards.
- The vehicle occupant may be pressed against the seat belt. The seat belt cannot protect as intended and could cause additional injury.
- A child restraint system will no longer be properly supported or positioned and will no longer fulfil its function as intended.
- The seat backrest will not be able restrain objects or goods in the load compartment.
There is a risk of the following, in particular:
- Before persons travel in the vehicle while sitting on a seat with the easy entry and exit feature
- After the seat backrest has been adjusted
- After the easy entry and exit feature has been used
- After the load compartment enlargement has been folded forwards
Always ensure that the seat backrest is engaged, especially:
If the seat backrest of the rear seat is folded forwards, persons in the third row of seats may hit parts of the seat mechanism, especially in the event of an accident, braking manoeuvre or abrupt change of direction.
If the cup holder in the folded-up rear armrest is open, there is an increased risk of injury for passengers in the third row of seats, especially during braking or in the event of an accident.
If you no longer require the seat backrest to be folded down for loading or for getting in and out, fold it back into place.
If you apply your full body weight to the grab handle or pull it abruptly, the grab handle may be damaged or come loose from its anchorage. This may result in injuries.
To get in and out, you can fold the seats on the second row of seats forwards in vehicles with a third row of seats. In this case, the centre seat folds forwards and backwards together with the left-hand seat in vehicles with a centre seat backrest.

The seat backrest will fold into the front position. The seat fore-and-aft adjustment will move forwards.

The seat will move back and stop when the end position is reached.

If a seat on the second row of seats is not in the end position, this will be shown on the driver's display.
- To increase the size of the luggage compartment, you can move the seat backrests into the luggage compartment floor position (Folding the rear seat backrest forwards) .
Folding the rear seats forwards mechanically (emergency release)
The release loops are located on the outer sides and rear sides of the seats on the second row of seats.
Side release loops
Release loops on the rear sides
